FMCC EUROPE
Components and technical solutions for power electronics

Series AXP 100

100 Watt Power Resistor with (4) wire Terminals, Version B for enforced mechanical stability


This new design of the non- inductive thick film Metal Oxide Technology with the wire terminals eliminates the possibility for problems regarding creeping distance from terminal to ground. This unique design will allow you to use this element in the following areas: Variable Speed Drives; Power Supplies; Control Devices; Telecommunications; Robotics; Motor Controls and other Switching Devices.

  


Derating (thermal resistance):
3.12W/°K (0.32°K/W).


Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK

Suggested Mounting Procedure:
1) Position component and press down by hand.
2) Fix both mounting screws (M4) with 0.1 to 0.2 Nm torque.
3) Apply final torque to mounting screws of 1.0 to 1.2 Nm max.  





Specifications

• Resistance Range:1Ω to 1MΩ
• Standard tolerance:±1% to ±10%
• Temperature coefficient:
 ±50, ±100ppm, ±250ppm (at +105°C ref. to +25°C) 
• Max. Work. Voltage: 500V (up to 1,000V on special request)
• Power rating: at 85°C BCT
• Standard wire length: L = 100mm (other lenghts are available on special request)
• Electric strength: 5kV DC (3kV AC higher values on request 
• Max. Torque: 1.2Nm
• Working temp. range:
-55 up to 155 °C 

 













Dim.MillimetersInches
Min.Max.Min.Max.
A44.845.21.7641.779
B16.317.30.6420.681
C29.730.11.1691.185
D26.226.61.0311.047
E22.023.00.8660.906
F4.14.30.1610.169
G8.08.40.1610.331
H4.14.40.0830.095
J5.86.20.3070.323
K10.010.50.3940.413
L95.0105.03.9374.134